Window Regulator Motor - Removal

REMOVAL






MOTOR-FRONT DOOR WINDOW





1. Disconnect and isolate the battery negative cable.

2. Remove the door trim panel. Front Door Trim Panel - Removal.

3. Disconnect the electrical connector.

4. Remove the mounting fasteners.

5. Remove the window motor.

MOTOR-SLIDING DOOR WINDOW





1. Disconnect and isolate the battery negative cable.

2. Remove the sliding door trim panel. Door Trim Panel - Removal.

3. Disconnect the electrical connector.

4. Remove the mounting fasteners.

5. Remove the window motor.

MOTOR-VENT WINDOW





1. Disconnect and isolate the battery negative cable.

2. Remove D-pillar trim panel. D-Pillar Trim Panel - Removal.

3. Disconnect wire connector (1) from power vent motor (3).

4. Using a flat bladed tool, carefully lift the circular actuator link tab (5). Remove link (4) from window ball socket (4). Vent Window Motor Armature - Removal.

5. Remove bolts (2) holding power vent motor to D-pillar.

6. Remove power vent motor.