Body Control Module - Installation

INSTALLATION

1. Position the BCM (2) and install the two lower and upper BCM bolts (3) to retain the BCM to the BCM bracket (1).






2. Reconnect all wiring harnesses to the BCM (5).






3. Position the park brake assembly back into place for installation. Installation

4. Reconnect the park brake switch connector.

5. Install the left sill and cowl panel Cowl Trim Panel - Installation

6. Install the remote park release access panel.

7. Reconnect the negative battery cable to the battery post.

8. Once the new BCM has been installed, reference and review RF Hub, BCM, PCM, FOBiK, And ELV Replacement And Programming Order