P1E08

P1E08-STOP/START DISABLED - AIRBAG DEPLOYMENT

For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
With the ignition on.

- Set Condition:
The Occupant Restraint Controller (ORC) sends a CAN Bus message to the PCM indicating that the Airbags have been deployed. One trip fault. If the vehicle is equipped with the stop/start feature, the system will be disabled when this DTC is active.

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Pre-Diagnostic Troubleshooting Procedure.

Diagnostic Test
DTC EXPLANATION

NOTE: This DTC indicates that the vehicle has been in an accident and the Airbag Module has deployed the Airbags.

View Repair.

Yes
Test Complete.