B210E-00

B210E-00-BATTERY VOLTAGE HIGH-

For a complete wiring diagram, refer to the Wiring Information.





Possible Causes-B210E-00

- When Monitored:
At all times.

- Set Condition:
Anytime the module senses voltage input above 15.9 volts, this code will set.





Diagnostic Test

1. CHECK ENGINE DTCs
1. With the scan tool, read Powertrain Control Module (PCM) DTCs.

Are there any Charging or Starting DTCs present?

Yes

- Testing and Inspection and perform the appropriate diagnostic procedure.

No

- Go To 2

2. TEST FOR INTERMITTENT CONDITION
1. With the scan tool, record and erase the DTCs.
2. Start the engine and run for two minutes.
3. With the scan tool, read the active DTCs.

Does the scan tool display; B210E-00-BATTERY VOLTAGE HIGH?

Yes

- Replace the External Disc Module (EDM).
- Perform the BODY VERIFICATION TEST. Body Verification Test .

No

- Test complete, the condition or conditions that originally set this DTC are not present at this time. Using the wiring diagrams as a guide, check all related splices and connectors for signs of water intrusion, corrosion, pushed out or bent terminals and correct pin tension.
- Perform the BODY VERIFICATION TEST. Body Verification Test .