Active Shutter Grille - Installation

INSTALLATION






1. Position the AGS assembly back onto the vehicle and secure on the lower hooks (1).
2. Position the wire harness (2) back onto the AGS assembly and connect the electrical connector (3).





3. Position the AGS assembly back up onto the radiator support fully.
4. Install the upper bolts (1) and tighten to
5. Install the lower bolts (2) and tighten to





6. Position the hood switch (1) back and seat fully.
7. Install the grille. Grille - Installation
8. When replacing the active grill shutter assembly or active grill shutter actuator with a service part it will be necessary to perform a counter reset with a scan tool. Follow the scan tool prompts as located under PCM/Misc. Functions/Active Grill Shutter Replace.