Active Shutter Grille - Removal

REMOVAL

NOTE: When replacing the Active Grille Shutter (AGS) assembly or AGS actuator with a service part it will be necessary to perform a counter reset with a scan tool. Follow the scan tool prompts as located under PCM/Misc. Functions/Active Grill Shutter Replace.






1. Remove the grille. Grille - Removal
2. Separate the hood switch (1) and position aside.





3. Remove the upper (1) and lower bolts (2) and tip the top of the AGS assembly down towards the front of the vehicle.





4. Disconnect the electrical connector (3) and position aside the wire harness (2).
5. Lift the AGS assembly off the lower hooks (1) and remove the assembly.