Vibration Damper - Installation

INSTALLATION

Special Tools:











CAUTION:
To prevent severe damage to the crankshaft, damper, and damper installer , thoroughly clean the damper bore and the crankshaft nose before installing damper.

1. Position the damper onto crankshaft.

2. Assemble the damper installer (8512A) (2) , and the pressing cup (1) from A/C hub installer (6871).

3. Using the damper installer (8512A) (2), and the pressing cup (1) from the A/C hub installer (6871), press the damper onto crankshaft.





4. Install the crankshaft damper bolt.

5. Position the (10386)(2), onto the vibration damper (3).

6. Tighten the bolt to 176 Nm (130 ft. lbs.).

7. Install the cooling fan.





8. Install the radiator upper shroud and tighten the fasteners to 11 Nm (95 in. lbs.).

9. Install the radiator upper hose.

10. Install the accessory drive belt (1) Serpentine Accessory Drive Belt - Installation.

11. Refill the cooling system Service and Repair.

12. Connect the negative cable to battery.