Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)

Anti-Lock Brake System Module - Removal

REMOVAL

CAUTION:
When removing ABM from HCU, be sure to completely separate the two components (approximately 38 mm (1.5 in.) before removing ABM. Otherwise, damage to the pressure sensor or Pump Motor connection may result requiring HCU replacement. Do not to touch the sensor terminals on the HCU side or the contact pads on the ABM side as this may result in contamination and issues in the future.

1. Remove the negative battery cable from the battery.

2. Pull up on the ABM harness connector release and remove connector.

3. Remove the ABM mounting bolts.

4. Remove the pump connector from the ABM.

5. Remove the ABM from the HCU.