Wheel Speed Sensor - Installation

CAB CHASSIS/4500/5500

NOTE:
All views typical.










1. Connect the harness to the sensor. Be sure the seal is securely in place between the sensor and the wiring connector.

2. Install the O-ring on the sensor (if removed).

3. Insert the sensor (1) in the differential housing (3).

4. Install the sensor shield.

5. Install the sensor mounting stud (2) and tighten to 24 Nm (200 in. lbs.).

6. Install the brake line on the sensor stud (2) and install the nut.

7. Remove the support and lower the vehicle.