Front Disc Brake Service Steps
NOTES, WARNINGS, AND HINTSPARTS REMINDER LIST
RECOMMENDED TOOLS
Tools and Equipment
PROCEDURES
1. Check for applicable Technical Service Bulletins (TSB).
2. Perform Initial Test Drive and Diagnosis By Symptom.
Testing and Inspection
3. Begin repairs, lift and support front of vehicle, remove front wheels.
4. Remove caliper assembly.
Service and Repair
5. Inspect brake linings and caliper assembly.
Testing and Inspection
6. Rebuild or replace caliper assembly if necessary.
Service and Repair
7. Inspect brake rotor/hub assembly, replace or resurface if necessary.
Testing and Inspection
8. Remove brake rotor/hub assembly.
Service and Repair
9. Repack wheel bearings.
Fundamentals and Basics
10. Install brake rotor/hub assembly.
Service and Repair
11. Install caliper assembly and new brake-pads.
Service and Repair
12. Bleed brakes.
Service and Repair
13. Install tire and wheel assembly.
14. Perform After Repairs Test Drive.
Testing and Inspection
ENVIRONMENTAL AND SAFETY CONCERNS
Environmental Impact Information