Engine Mount: Service and Repair

FRONT

1. Raise hood, then position fan and related components to ensure necessary clearance.
2. Raise and support vehicle, then attach a suitable lifting device to engine.
3. Remove engine mount to frame attaching nuts.
4. Raise engine slightly, then remove mounts. Some models incorporate a insulator between the engine mount and engine mount attaching bracket.
5. Reverse procedure to install. Torque attaching nuts to 75 ft. lbs. and attaching bolts to 65 ft. lbs.

REAR

1. Raise hood, then position fan and related components to ensure necessary clearance.
2. Raise and support vehicle, position a suitable jack under transmission assembly.
3. Slightly raise transmission and engine assembly, then remove rear mount through bolts.
4. Remove U-shaped bracket from frame cross member.
5. Remove insulator from bottom face of transmission extension housing.
6. Reverse procedure to install. Torque attaching nuts to 75 ft. lbs. and attaching bolts to 65 ft. lbs.