Sliding Side Cargo Door Striker

Front Latch Striker Removal/Installation:

FRONT LATCH STRIKER REMOVAL
1. Mark the outline of the striker on the door pillar for installation reference.
2. Remove the striker retaining screws from the door pillar.
3. Remove the striker, shims (if used) and spacer from the door pillar.

INSTALLATION
1. Position the spacer, shims (if used) and striker on the door pillar with the screw holes aligned.
2. Install the striker retaining screws in the door pillar. Tighten the screws with 11 Nm (95 in. lbs.) torque.
3. If necessary, adjust the striker. Refer to Door Fore/Aft Adjustment.

REAR LATCH (CENTER) STRIKER REMOVAL
1. Mark the outline of the striker on the door pillar for installation reference.

Rear Latch (Center) Striker Up/Down Adjustment:

2. Remove the striker retaining screws from the door pillar.

Rear Latch (Center) Striker:

3. Remove the striker, shims (if used) and spacer from the door pillar.

INSTALLATION
1. Position the spacer and the striker on the door pillar with the screw holes aligned. If used, ensure that the shims are installed.
2. Install the striker retaining screws in the door pillar. Tighten the screws with 11 Nm (95 in. lbs.) torque.
3. If necessary, adjust the striker. Refer to Door Up/Down Adjustment.