Instrument Panel Antenna Cable Replacement
REMOVAL1. Disconnect and isolate the battery negative cable
2. Remove the glove box.
3. Remove the instrument panel center bezel.
4. Remove the instrument panel lower right center bezel.
5. Remove the radio (Refer to AUDIO/RADIO - REMOVAL).
Fig. 4 Instrument Panel Antenna Cable:
6. Remove antenna cable from instrument panel by pulling on retaining fasteners.
INSTALLATION
1. Install antenna cable to instrument panel by pressing retaining fasteners into position.
2. Connect instrument panel antenna cable to antenna body and cable.
3. Install radio (Refer to AUDIO/RADIO - INSTALLATION).
4. Install the instrument panel lower right center bezel.
5. Install the instrument panel center bezel.
6. Install the glove box.
7. Connect the battery negative cable.