Brake Lamp: Service and Repair

REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the tail lamp unit (Refer to ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/TAIL LAMP UNIT - REMOVAL).
3. Remove the bulb back plate from the tail lamp unit.
4. Remove the bulb from the back plate.

INSTALLATION
1. Install the bulb into the back plate.
2. Install the bulb back plate to the tail lamp unit.
3. Install the tail lamp unit (Refer to ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/TAIL LAMP UNIT - INSTALLATION).
4. Connect the negative battery cable.