Rear Door Glass Run Weatherstrip

REAR DOOR GLASS RUN WEATHERSTRIP

REMOVAL




1. Lower the glass.
2. Separate the rear door glass run weatherstrip (5) out of the door frame (2) and remove through the window opening.

INSTALLATION






NOTE: A mixture of soap and water may be used to aid installation of the weatherstrip into the corners.

1. Position the rear door glass run weatherstrip (5) into the door (2) through the window opening.
2. Position the weatherstrip (5) into the upper corners and seat firmly.
3. From back to front, seat the weatherstrip (5) between the corners and then down the sides firmly.