Instrument Cluster / Carrier: Locations

The EMIC houses six analog gauges and has provisions for up to twenty-three indicators. Some of the EMIC indicators are automatically configured when the EMIC is connected to the vehicle electrical system for compatibility with certain optional equipment or equipment required for regulatory purposes in certain markets. While each EMIC may have provisions for indicators to support every available option, the configurable indicators will not be functional in a vehicle that does not have the equipment that an indicator supports.






The EMIC includes the following analog gauges:
- Coolant Temperature Gauge (14)
- Fuel Gauge (22)
- Oil Pressure Gauge (10)
- Speedometer (8)
- Tachometer (4)
- Voltage Gauge (2)

The EMIC includes the following VFD units:
- Gear Selector Indicator (16)
- Odometer/Trip Odometer (20)

The EMIC includes provisions for the following indicators:
- Airbag Indicator (with Airbag System only) (5)
- Antilock Brake System (ABS) Indicator (with ABS or Rear Wheel Anti-Lock [RWAL] brakes only) (13)
- Brake Indicator (18)
- Cargo Lamp Indicator (11)
- Check Gauges Indicator (25)
- Cruise Indicator (in Gear Selector Indicator VFD)
- Door Ajar Indicator (12)
- High Beam Indicator (6)
- Lamp Out Indicator (in Odometer/Trip Odometer VFD)
- Low Fuel Indicator (23)
- Malfunction Indicator Lamp (MIL) (1)
- Seatbelt Indicator (7)
- Security Indicator (with Sentry Key Immobilizer & Vehicle Theft Security Systems only) (15)
- Service Four-Wheel Drive Indicator (with Four-Wheel Drive only) (in Odometer/Trip Odometer VFD)
- Tow/Haul Indicator (with Automatic Transmission only) (in Odometer/Trip Odometer VFD)
- Transmission Overtemp Indicator (with Automatic Transmission only) (24)
- Turn Signal (Right and Left) Indicators (3 & 9)
- Upshift Indicator (with Manual Transmission only in certain markets where required) (in Gear Selector Indicator VFD)
- Washer Fluid Indicator (in Odometer/Trip Odometer VFD)
- Wait-To-Start Indicator (19)
- Water-In-Fuel Indicator (17)