B1A09

B1A09-RKE FOB 2 PERFORMANCE - WCM

For a complete wiring diagram refer to Diagrams/Electrical.

- When Monitored:

Continuously.

- Set Condition:

Scrambled messages to the wireless control module from the transmitter.

NOTE: The most probable cause for this code to set is if the Wireless Control Module (WCM) senses over 150 presses from the RKE transmitter, when it is out of range.





Diagnostic Test

1. TEST FOR INTERMITTENT CONDITION

Put the key in the ignition and turn the ignition on.

With the scan tool, record and erase DTC's

Operate the RKE transmitter in all positions several times.

With the scan tool, read DTC's.

Does the scan tool display B1A09-RKE FOB 2 PERFORMANCE?

Yes

- Replace the RKE transmitter and program.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test

No

- The conditions that caused this code to set are not present at this time. Inform the owner of the most probable cause for this code to set and therefore cause the RKE to be inoperative.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test