P1697

P1697-EMR (SRI) MILEAGE NOT STORED

For a complete wiring diagram refer to Diagrams/Electrical.


- When Monitored:

Continuously with the ignition on.

- Set Condition:

An attempt to program/write to the internal EEPROM failed, Also checks at power down. One Trip Fault. Three good trips to turn off the MIL.







Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding.


Diagnostic Test


1. SCAN TOOL DISPLAYS A WRITE FAILURE

With a scan tool, perform the SRI Memory Test.

Does scan tool display Write Failure?

Yes

- Replace and program the Powertrain Control Module.
- Perform the POWERTRAIN VERIFICATION TEST. Powertrain Verification Test

No

- Go To 2


2. SCAN TOOL DISPLAYS A WRITE REFUSED

With the a scan tool, perform the SRI Memory Test.

Does the scan tool display Write Refused?

Yes

- Go To 3

No

- Go To 4


3. PCM REFUSED 2ND TEST

With a scan tool, perform the SRI Memory Test a third time.


NOTE: Retest the SRI Memory two more times.

Does the scan tool display Write Refused again?

Yes

- Replace and program the Powertrain Control Module.
- Perform the POWERTRAIN VERIFICATION TEST. Powertrain Verification Test

No

- Test Complete.


4. SCAN TOOL DISPLAYS SRI MILEAGE INVALID

With a scan tool, perform the SRI Memory Test.

Does the scan tool display SRI Mileage Invalid?

Yes

- Update the mileage and retest the SRI Memory.
- Perform the POWERTRAIN VERIFICATION TEST. Powertrain Verification Test

No

- Go To 5


5. COMPARE SRI MILEAGE WITH ODOMETER

Compare the SRI Mileage stored with the Instrument Panel Odometer.

Is the mileage within the specified range displayed on the scan tool?

Yes

- Test Complete.

No

- Update the mileage and retest the SRI Memory.
- Perform the POWERTRAIN VERIFICATION TEST. Powertrain Verification Test