Installation

INSTALLATION




1. Position the hood (1) onto the hood hinges (2) and loosely install the two nuts (3) that secure the hood to each hood hinge.

2. Align the hood to the hood hinges using the reference marks made during the Removal procedure and tighten the nuts to 23 Nm (17 ft. lbs.).

3. Install the support cylinders to the hood.

4. If removed, install the grille frame and the grille to the hood.

5. Install the underhood lamp unit and the ambient temperature sensor to the hood.

6. Reconnect the negative battery cable.

7. If required, adjust the hood to the correct position.