Blowers Not On High - Test Not Run

BLOWERS NOT ON HIGH - TEST NOT RUN

For a complete wiring diagram refer to Diagrams/Electrical.

- When Monitored:

When the Cooldown Test is executed.

- Set Condition:

If either the blower speed was not set to high speed prior to starting the Cooldown Test or the blower speed was changed from high speed to another setting after starting the Cooldown test.

For dual-zone HVAC systems, refer to B10B2-A/C COOL DOWN TEST PERFORMANCE for the diagnostic test procedure. B10B2

For single-zone HVAC systems, refer to B1079-CLIMATE CONTROL COOL DOWN TEST EXCESSIVE TIME for the diagnostic test procedure. B1079