License Plate Lamp - Installation

LAMP





1. Align the socket and bulb (3) with the keyed opening on the back of the license plate lamp lens/housing (5).
2. Insert the socket and bulb into the housing until the socket is firmly seated.
3. Rotate the socket clockwise about 30 degrees to lock it into place.
4. Engage the retaining clip (4) on the front edge of the lamp housing into the notch at the forward edge of the mounting hole (2) in the rear bumper.
5. Using hand pressure, press the rear edge of the lamp housing toward the front of the vehicle against the spring pressure of the retaining clip, then push the rear edge of the lamp into the rear of the mounting hole in the rear bumper until the tab (1) on the rear of the lamp is engaged in the mounting hole.
6. Reconnect the battery negative cable.