Seat - Installation

INSTALLATION

CAUTION: Do not handle by seat adjuster release bar.

NOTE: Ensure that the seat tracks are rearward. Ensure the seat tracks on the right and left are in equal latch positions.

NOTE: Seats, Front for a detailed exploded view of the seats.

1. Place front seat in position in vehicle.
2. Connect front seat wire harness connector to body harness connector.
3. Install bolts to attach front of seat adjuster to the floor. Tighten bolts to 65 Nm (48 ft. lbs.).
4. Slide seat forward and install bolts attaching rear of seat track to the floor. Tighten bolts to 65 Nm (48 ft. lbs.).
5. Install seat belt anchor bolt through seat belt and snap seat belt anchor cover to seat cover side shield.
6. Connect the battery negative cable.
7. Verify front seat operation.