Operation CHARM: Car repair manuals for everyone.

Procedures






FRONT LAMP UNIT MOISTURE CLEARING

Some occasional moisture accumulation inside a vented front lamp unit is normal and appears as a fogging on the inside of the lamp lens, similar to the fog that sometimes appears on the inside of a windshield. This condition is caused by rapidly changing temperature and humidity levels between the air internal and external to the lamp, and will usually dissipate once the temperature and humidity conditions have been allowed to stabilize. Accelerated removal of such moisture may be accomplished by activating the headlamps on HIGH beam for about 15 minutes.

However, water droplets larger than 1 millimeter (0.039 inch) in size accumulated on the inside of the lamp lens, water droplets visible on most internal lamp surfaces or large quantities of water within the lamp indicates a problem with the lamp sealing that has allowed excessive amounts of water to enter the lamp. Once such excessive moisture has entered the lamp, it will always be present and will never disappear. A lamp with permanent internal moisture should be replaced.