Yaw Rate Sensor: Description and Operation

DESCRIPTION





The yaw rate and lateral acceleration sensors are housed into one unit known as the dynamics sensor (2). The sensor is used to measure side-to-side (lateral) motion and vehicle rotational sensing (how fast the vehicle is turning - yaw). The dynamics sensor (2) is located on the floor panel transmission tunnel under the center floor console (or if equipped with a bench seat, under the front center seat section) next to the Occupant Restraint Controller (ORC) (3).

NOTE: If the dynamics sensor is replaced, it must be initialized using the scan tool.

The yaw rate and lateral acceleration sensors cannot be serviced separately. The entire dynamics sensor (2) must be replaced when necessary.