Floor Distribution Duct - Removal

REMOVAL

WARNING: Disable the airbag system before attempting any steering wheel, steering column, or instrument panel component diagnosis or service. Disconnect and isolate the negative battery (ground) cable. Wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to take the proper precautions may result in accidental airbag deployment and possible serious or fatal injury.

LEFT SIDE






NOTE: Illustration shown with instrument panel removed from view for clarity.

1. Remove the left side instrument panel silencer.
2. Remove the push pin (3) that secures the left side floor ducts (1) to the instrument panel.
3. Disconnect the left side floor ducts from the HVAC housing (2).

RIGHT SIDE






NOTE: Illustration shown with instrument panel removed from view for clarity.

1. Remove the right side instrument panel silencer.
2. Disconnect the right side floor ducts (1) from the HVAC housing (2).