Sunroof - Removal

REMOVAL






WARNING: The Excessive Force Limitation (EFL) feature must be calibrated any time a sunroof motor/module is replaced with a new component. Failure to perform this procedure could result in vehicle damage and/or personal injury. Programming and Relearning CALIBRATION) for the appropriate procedure.

1. Remove the glass, Sunroof Glass - Removal.
2. Disconnect and isolate the battery negative cable.
3. Remove headliner Headliner - Removal.
4. Disconnect the sunroof wire harness electrical connector (1).





5. Disconnect the four drain tubes (1) from sunroof housing.





6. With the aid of a helper, support the sunroof and remove the eight fasteners (2) attaching sunroof assembly (1) to roof panel.
7. Remove the sunroof (1) from vehicle.