Fuel Tank - Installation

INSTALLATION





1. If fuel pump module installation is necessary Fuel Tank - Installation
2. Secure the fuel tank onto a suitable hydraulic jack with a fuel tank adapter.
3. Raise and position the fuel tank leaving room to make the connections at the top of the fuel tank.
4. Connect the fuel supply line (6) to the fuel pump module.
5. Connect the electrical connector (5) to the fuel pump module.





6. Raise the fuel tank (1) until snug to the body.
7. Install the fuel tank straps (4).
8. Install the strap nuts (5) and tighten to 41 Nm (30 ft. lbs.).

9. Remove the hydraulic jack.




10. Connect the electrical connector to the ESIM switch (4).
11. Connect the quick-connect fitting at the front of the fuel tank (10).
12. Connect the quick-connect fitting (8) at the rear of the fuel tank.
13. Connect the fill hose (7) at the rear of the fuel tank and securely tighten the fill hose retaining clamp (9).





14. Connect the fuel line quick-connect fitting at the fuel rail (1).





15. Connect the negative battery cable (1).
16. Fill the fuel tank.
17. Start the engine and check for leaks at all fuel tank connections.