Keyless Entry: Description and Operation

GENERAL INFORMATION
The system allows locking and unlocking of vehicle door(s) and trunk lid by remote control using a hand held radio transmitter. The ignition switch must be OFF before the trunk lid can be unlocked with the transmitter.

The receiver may receive signals from two transmitters. Each transmitter has its own code, and the code has been stored in memory. If the transmitter is replaced or a second transmitter is added, the code on both units have to be placed in memory.

Keyless Entry Transmitter:

OPERATION
The transmitter has three buttons for operation.

^ UNLOCK driver's door, enable illuminated entry, and disarm the Theft Security System. Pushing and releasing the button once will unlock the driver's door. Two times within five seconds all doors will unlock.
^ LOCK all doors, set Theft Security System and chirp horn. Chirp of horn is a short toot to notify that the alarm system is set and the indicator lamp on the instrument panel will flash for about 15 seconds.
^ Unlock Trunk Lid

The receiver is capable of retaining VAC even when power is removed.

Each receiver must have at least one and no more than two transmitters.

CONTROL RANGE
Operation range is within 7 meters (23 ft.) of the receiver.

TRANSMITTER BATTERY
The battery can be removed without special tools and are readily available at local retail stores. The recommended battery is Duracell DL 2016 or equivalent. Battery life is about one to two years.