Seats: Service and Repair

Rear Seat Back And Bolster:

REAR SEAT CUSHION REMOVAL
1. Remove bolts holding cushion to floor.
2. Push center occupant seat belts through openings in cushion.
3. Remove cushion from vehicle.
4. Reverse the preceding operation for installation.

REAR SEAT BACK REMOVAL
1. Hinge seat back forward and disengage push-in fasteners holding carpet backing to trunk floor.
2. Remove bolts holding outboard hinge pivot bracket to seat back.
3. Pull seat back outward to disengage inboard pivot and separate from vehicle.
4. Reverse the preceding operation for installation.

SEAT BACK BOLSTER CUSHION REMOVAL
1. Remove rear seat cushion and back as necessary.
2. Remove bolts holding outboard seat back bolster to quarter panel.
3. Lift bolster upward to disengage hook retainer on back of bolster and separate from vehicle.
4. Reverse the preceding operation for installation.