General Safety Guidelines (Without SRS)

When servicing any vehicle observe the following cautions:

1. Always wear appropriate eye protection.

2. Block the drive wheels, as a safety routine, before beginning any service with the vehicle on the ground.

3. Never work under a vehicle supported only by a jack. Use jackstands, on a flat and level hard surface, for safe support.

4. Exercise care when performing spark test, always use non-conductive ignition wire pliers, Ignition systems present a shock hazard.

5. Use caution when working near the catalytic converter to prevent the possibility of burns. The temperatures within the converter can exceed 1200°F.

6. Exercise care when working with spring or tension loaded fasteners such as E-clips, or snap rings, careless removal can cause personal injury.