Item 1 DTC 35 Loss of Prime

If multiple DTC's are seen with a 35, attempt to trace down alternate DTC's before addressing DTC 35. DTC 35 can only be set in a forward gear range. DTC 35 is very difficult to reproduce. If DTC 35 is seen with no other causes for loss of prime (low fluid level, poor filter installation etc.) the pump will require replacement.

NOTE:
DURING A FLUID CHANGE PROCEDURE UNDER THE PROPER CONDITIONS DTC 35 COULD BE COULD BE GENERATED DUE TO NO/LOW FLUID LEVEL DURING THE FILL/STARTUP PROCEDURE. IN THIS CASE, CODE 35 WOULD BE ERRONEOUS.