Input Clutches Disassembly

Tapping Reaction Plate:

Reverse Clutch Snap Ring:

Reverse Clutch Reaction Plate:

Reverse Clutch Reaction Plate:

Reverse Clutch Pack:

NOTE: Tag reverse clutch pack for reassembly identification.

OD/Reverse Pressure Plate Snap Ring:

OD/Reverse Pressure Plate:

Waved Snap Ring:

Remove OD Clutch Pack:

Overdrive Clutch Pack:

NOTE: Tag overdrive clutch pack for reassembly identification.

Overdrive Shaft Assembly:

Underdrive Shaft Assembly:

No. 2 Needle Bearing:

NOTE: The OD/UD Reaction Plate, Snap Rings, and Input Clutches Retainer is not interchangeable with previous year 41TE components. The snap rings are thicker and the position of the ring lands have changed.

OD/UD Reaction Plate Tapered Snap Ring:

OD/UD Reaction Plate:

NOTE: The OD/UD Clutches Reaction Plate has a step on both sides. Install the OD/UD Clutches Reaction Plate tapered step side up.

Remove One UD Clutch Disc:

UD Clutch Flat Snap Ring:

Underdrive Clutch Pack:

NOTE: Tag underdrive clutch pack for reassembly identification.

UD Spring Retainer Snap Ring:

UD Return Spring And Retainer:

Underdrive Clutch Piston:

Input Hub Tapered Snap Ring:

Tap On Input Hub:

Input Hub Removed:

Pull Retainer From Piston:

Remove Snap Ring:

Snap Ring And Return Spring:

Remove Input Shaft Snap Ring:

Remove Input Shaft:

CAUTION: Compress return spring just enough to remove or install snap ring.