Vehicle Damage Warnings

REPLACING BULBS AND FUSES
When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload. If a properly rated fuse continues to blow, it indicates a problem in the circuit that must be corrected.

When replacing any bulbs, do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the new bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol.

IMPORTANT NOTE: If the Powertrain Control Module has been changed and the correct VIN and mileage have not been programmed, a DTC will be set in the Airbag module. In addition, if the vehicle is equipped with a Sentry Key Immobilizer Module (SKIM), Secret Key data must be updated to enable starting.

For Airbag system:
ACTION:
1. Enter correct VIN and Mileage in PCM.
2. Erase codes in Airbag module.