Upper Quarter Trim

UPPER QUARTER TRIM

REMOVAL

1. Remove the door opening weatherstrips as necessary.
2. Remove rear seat cushion.
3. Remove bolt attaching rear seat belt anchor to floor.

Fig. 30:

4. On vehicles equipped with a side curtain air bag, open the screw cap covers and remove the screws (Fig. 30).
5. Fold the seat back down.

Fig. 31:

6. Disengage clips attaching upper quarter trim to inner quarter panel (Fig. 30) and (Fig. 31).
7. Route seat belt webbing through access hole in upper quarter trim.
8. Remove upper quarter trim panel from vehicle.

INSTALLATION

1. Place upper quarter trim panel into position.
2. Route seat belt webbing through access hole in upper quarter trim.
3. Engage clips attaching upper quarter trim to inner quarter panel.
4. On vehicles equipped with side curtain air bag, install the screws and close the screw cap covers.
5. Install bolt attaching rear seat belt anchor to floor.
6. Install rear seat cushion.
7. Install the door opening weatherstrips as necessary.