Headlamp Unit Replacement

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the two retaining screws.
3. Remove upper fascia retainers by prying under the head of the fasteners with a flat bladed tool.
4. Remove headlamp unit from fender side first, then pull headlamp unit out.
5. Disconnect the wiring harness from the bulbs.
6. Remove the headlamp unit.

INSTALLATION
1. Connect wire harness to the bulbs.
2. Install headlamp unit.
3. Install the retaining screws.
4. Install upper fascia retainers.
5. Connect the battery negative cable.