Camshaft Position Sensor - Removal

REMOVAL






1. Disconnect and isolate the negative battery cable.
2. Remove the air cleaner body (1) .





3. Disconnect the PCV hose (1) from the intake manifold.
4. Disconnect the vent hose (3) from the cylinder head cover.
5. Remove three bolts (2) and remove the oil separator housing (4) from the cylinder head cover.





6. Unlock and disconnect the Camshaft Position (CMP) sensor wire harness connector (1).





7. Remove the mounting bolt (2) and Camshaft Position (CMP) sensor (1).





8. The Camshaft Position (CMP) sensor O-ring (1) can be reused if not damaged.