Overhead Console - Removal

REMOVAL





1. Using a trim stick, pry down to release the clips (2), and remove the Overhead Lighting Module (OLM) (3) from the overhead console (1).
2. Disconnect the electrical connectors from the lighting module as needed, and remove the module.





3. Pull downward on the sides of the overhead console housing (4) firmly and evenly to disengage the snap clips (3) from the overhead console bracket (1).
4. Lower the overhead console far enough to access the wire harness connector (2).
5. Disconnect the wire harness connector from the connector receptacle as needed.
6. Remove the overhead console.