Park Assist Module - Removal

REMOVAL





1. Disconnect and isolate the battery negative cable.
2. Remove the trim from the right quarter inner panel to access the park assist module (4), which is located at the C-pillar. Rear Quarter Trim Panel - Removal.
3. Disconnect the three body wire harness connectors (2) from the park assist module connector receptacles.
4. Remove the fastener (1) that secures the module to the right quarter inner panel.
5. Slide the module upward far enough to disengage the lower mounting tab from the stamped pocket (3) in the right quarter inner panel.
6. Remove the module from the vehicle.