Carburetor - Cold Start Stalling

84ford5

Article No. 84-21-18

STALLS - COLD START (5.8L 4V) H.O. WITH HOLLEY 4180-C CARBURETOR


LIGHT TRUCKS 1984 E, F AND BRONCO

CALIBRATIONS: 4-64G, 4-64Z

If the diagnostic routines on page 40 of TSB 84-18-22 (dated 8/28/84) do not eliminate cold start stalling, perform the following:

Increase the high cam idle speed to 2100 rpm. For detailed descriptions of this procedure, see page 24-26-7 of the 1984 Light Truck Engine Shop Manual.



Obtain an Authorized Modifications decal and list the date, dealer number and summary of alterations performed. Select a prominent place adjacent to the Vehicle Emission Control Information decal suitable for installing the Authorized Modifications decal. Clean the area, install the decal and cover it with a clear plastic decal shield.
OTHER APPLICABLE ARTICLES: 84-18-22
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: 9500CSl
TIME: 0.1 Hr. DLR. CODING: Basic Part No. 9510 Code: H6