Torque Specifications
| Specific Applications | Camshaft Sprocket - Gear to Camshaft | 55-61 Newton Meter (Nm) |
| Camshaft Thrust Plate to Cylinder Block | 13-16 Newton Meter (Nm) | |
| Connecting Rod Nut - 5.OL (302 CID) V-8; 2V and EFI | 26-32 Newton Meter (Nm) | |
| Connecting Rod Nut - 5.8L (351 CID) W-V-8 | 55-61 Newton Meter (Nm) | |
| Cylinder Front Cover | 17-24 Newton Meter (Nm) | |
| Cylinder Head Bolts | (1) (2) - (1) 5.0L (302 CID) V-8-Torque in steps: first to 75-88 Nm (55-65 ft-lb), then to 88-97 Nm (65-72 ft-lb). (2) 5.8L (351 CID) W-V-8-Torque in steps: first to 115 Nm (85 ft-lb), then to 129 Nm (95 ft-lb), finally to 143-151 Nm (105-112 ft-lb). | |
| Damper to Crankshaft | 95-122 Newton Meter (Nm) | |
| EGR Valve to Carburetor Spacer or Intake Manifold | 17-24 Newton Meter (Nm) | |
| Fuel Pump to Cylinder Block or Front Cover | 26-36 Newton Meter (Nm) | |
| Flywheel to Crankshaft | 102-115 Newton Meter (Nm) | |
| Main Bearing Cap Bolts - 5.OL (302 CID) V-8 | 82-94 Newton Meter (Nm) | |
| Main Bearing Cap Bolts - 5.8L (351 CID) W-V-8 | 129-142 Newton Meter (Nm) | |
| Manifold to Cylinder Head - Intake | 32-33 Newton Meter (Nm) | |
| Manifold to Cylinder Head - Exhaust | 25-32 Newton Meter (Nm) | |
| Intake Manifold Vacuum Fittings - Aluminum | 8-13 Newton Meter (Nm) | |
| Intake Manifold Vacuum Fittings - Cast Iron | 32-37 Newton Meter (Nm) | |
| Intake Manifold Pipe Fittings - Aluminum | 17-24 Newton Meter (Nm) | |
| Intake Manifold Pipe Fittings - Cast Iron | 32-37 Newton Meter (Nm) | |
| Oil Inlet Tube to Main Bearing Cap | 30-43 Newton Meter (Nm) | |
| Thermactor Pump Bracket to Cylinder Block | 44-67 Newton Meter (Nm) | |
| Carburetor Mounting Stud | 7-13 Newton Meter (Nm) | |
| Distributor Clamp Down | 24-32 Newton Meter (Nm) | |
| Oil Filter Insert to Cylinder Block/Adapter | 28-40 Newton Meter (Nm) | |
| Oil Filter to Adapter or Cylinder Block | 1/2 Turn after Gasket Contacts Sealing Surface - Oiled Gasket | |
| Oil Inlet Tube Pump | 14-20 Newton Meter (Nm) | |
| Oil Pan Drain Plug | 21-33 Newton Meter (Nm) | |
| Oil Pan to Cylinder Block | 13-14 Newton Meter (Nm) | |
| Oil Pump to Cylinder Block | 30-43 Newton Meter (Nm) | |
| Pulley to Damper Bolt | 48-67 Newton Meter (Nm) | |
| Rocker Arm Stud/Bolt to Cylinder Head | 25-33 Newton Meter (Nm) | |
| Spark Plug to Cylinder Head | 14-20 Newton Meter (Nm) | |
| Valve Rocker Arm Cover | 4-6 Newton Meter (Nm) | |
| Water Outlet Housing | 13-16 Newton Meter (Nm) | |
| Water Pump to Block/Front Cover | 17-24 Newton Meter (Nm) | |
| Alternator Bracket to Cylinder Block - Bolt | 17-24 Newton Meter (Nm) | |
| Alternator Adjusting Arm to Alternator Bolt | 33-60 Newton Meter (Nm) | |
| Thermactor Pump Pivot Bolt | 30-43 Newton Meter (Nm) | |
| Thermactor Pump Adjusting Arm to Pump | 30-43 Newton Meter (Nm) | |
| Thermactor Pump Pulley to Pump Hub | 17-24 Newton Meter (Nm) | |
| Fuel Filter to Carburetor | 10-11 Newton Meter (Nm) | |
| Carburetor Attaching Nuts | 17-20 Newton Meter (Nm) | |
| Lower Intake Manifold to Head | 32-33 Newton Meter (Nm) | |
| EGR Tube | 8-11.5 Newton Meter (Nm) | |
| EGR Valve to Upper Intake Manifold | 17-25 Newton Meter (Nm) | |
| Air Supply Tube Clamps | 1.3-2.25 Newton Meter (Nm) | |
| Upper Intake Manifold to Lower Intake Manifold Bolts | 20-30 Newton Meter (Nm) | |
| Throttle Body to Upper Intake Manifold | 16-24 Newton Meter (Nm) | |
| Air Bypass Valve to Throttle Body | 8-11 Newton Meter (Nm) | |
| Throttle Position Sensor to Throttle Body | 1.2-1.8 Newton Meter (Nm) | |
| Fuel Pressure Regulator to Injector Manifold | 3-4.5 Newton Meter (Nm) | |
| Fuel Injector Manifold to Fuel Charging Assembly | 16-20 Newton Meter (Nm) | |
| Coil Bracket to Manifold Stud | 5.9-7.4 Newton Meter (Nm) | |
| Throttle Cable Bracket to Manifold | 11-13 Newton Meter (Nm) |