(G) Front Leaf Spring Brackets
NOTE:USE WARRANTY DEALER CODING: 5340, AS BASIC PART NO.
Inspect the rivets for looseness. Replace any loose or poorly seated rivets using the following procedure.
1. Remove damaged or loose rivet:
a. Drill a 3.175 mm (1/8") hole through the rivet.
b. Redrill the same hole through the shank of the rivet with a 8.731 mm (11/32") drill.
c. Remove the rivet head with an air chisel.
d. Drive out the rivet with a punch and hammer.
CAUTION:
DO NOT REMOVE THE FASTENER WITH A CUTTING TORCH BECAUSE DAMAGE TO THE FRAME STRUCTURE IS LIKELY TO RESULT.
2. Install a new Bolt (58634-S2), two (2) Washers (44877-S2) and a Nut (34987-52). Torque to 62 +/- 15 Nm (46 +/- 11 lb-ft).