Large Reinforcement Installation Procedure

Figure 7:

Use reinforcement kit E3TZ-7K509-B on all 1983-1991 Bronco/F-Series trucks with hydraulic clutch controls. The kit consists of the following items:

^ A main reinforcement or doubler, with a plate having two studs to clamp the doubler through the cowl inner

^ Two additional pieces with three threaded holes:
One plate helps attach the main doubler through the dash inner tunnel. The other large piece is placed inside the front of the cowl, with bolts driven through from the engine compartment side of the dash reinforcement, see Figure 7.