Post Collision Safety Belt Inspection

All seat belt assemblies must be replaced after a collision, provided either:
1. The seat belt was in use at the time of the accident, or
2. The seat belt was damaged by the accident (bent retractor, torn webbing, etc.), or
3. The seat belt attaching area(s) was damaged by the accident.

Before installing the new seat belt assembly, the seat belt attaching areas must be inspected for damage and distortion. If the attaching points are damaged and distorted, the sheet metal must be reworked back to its original shape and structural integrity.

Install the new seat belt(s).Then perform Functional Test Procedure.