AA27 - Check For Coil- Open In Harness
^ Key off.
^ Disconnect diagnostic harness ICM tee from ICM only; leave ICM tee connected to vehicle harness.
^ Disconnect B+ lead of DI diagnostic harness from battery.
^ DVOM on 200 ohm scale.
^ Measure resistance between J3 (COIL COIL-) and J4 (ICM COIL-).
^ Is resistance less than 5.0 ohms?
YES -- Go to AA28. AA28 - Check For Coil- Short High In Harness
NO -- Service open coil between ICM and coil in harness. Remove all test equipment. Reconnect all components. Clear continuous memory. Rerun quick test.