E40D
Manual Lever Position (MLP) Sensor
Terminal Locations:
Schematics:
Component Testing Procedure:
Description-The Manual Lever Position (MLP) Sensor sends a signal to the PCM. This indicates the position of the shift lever (P, R, N, D, 2 or 1). The MLP is located on the outside of the transmission at the manual lever.
Transmission function-Used as an input to determine desired gear and EPC.
Symptoms-Harsh engagements, firm shift feel.
Fault Codes-67 (two digit), 634, 654 (three digit)(this code also displays if A/C is on during On-Board Diagnostics or On-Board Diagnostic run in neutral). Refer to Manufacturer Code Charts