AA20 - Check PIP Signal
- Key "OFF".
- Breakout box installed, Powertrain Control Module (PCM) connected.
- Reconnect Camshaft Position (CMP) sensor and Governor Control Module (GCM).
- Measure voltage between test pin 56 and test pin 16 at breakout box.
- Is voltage between 3.0 and 7.0 volts?
Yes -- Replace PCM. Remove breakout box. Reconnect all components. Rerun quick test. Quick Test Appendix (Detailed Testing Instructions)
No -- Go to AA6. AA6 - Check Continuity of Ignition Ground Circuit