Without Airbag

1. Position the wheels in a straight-ahead position.
2. Disconnect battery ground cable.
3. Unsnap the steering wheel pad horn switch from the steering wheel by grasping the sides of the steering wheel pad horn switch and pulling toward yourself.
4. Disconnect the horn/speed control wire harness connector from the air bag sliding contact and remove the steering wheel pad horn switch from the steering wheel.
5. Remove the steering wheel retaining nut.
6. Using steering wheel puller tool No. T67L-3600-A, or equivalent, remove steering wheel from shaft.
7. Reverse procedure to install. Torque steering wheel attaching bolt to 23-33 ft lb