Cylinder Head

DIMENSIONS
Gasket Surface Flatness: 0.003 inch in any 6 inch, 0.006 inch overall
Gasket Surface Finish: 60-150 RMS.





TORQUE SPECIFICATIONS
Cylinder Head Attaching Bolts-in Sequence:
Step 1: 95-108 Nm (70-80 ft. lbs.)
Step 2: 136-149 Nm (100-110 ft. lbs.)
Step 3: 176-189 Nm (130-140 ft. lbs.)

When this procedure is used, it is not necessary to tighten bolts after extended operation.