Pressure Plate: Testing and Inspection

1. Clean clutch pressure plate and flywheel with a suitable commercial alcohol base solvent so surfaces are free from any oil film.

CAUTION: Do not use cleaners with a petroleum base, and do not immerse the clutch pressure plate in the solvent.

NOTE: The Belleville design clutch pressure plate does not need to be lubricated.

2. Inspect surface of clutch pressure plate for burn marks, scores, flatness, or ridges.
3. If the clutch pressure plate is badly heat-checked or deeply scored, replace clutch pressure plate and cover assembly.
4. Check clutch pressure plate finger heights.
5. If a substantial difference in finger wear exists, the heavily worn finger is binding. Replace the clutch pressure plate.