1997-98 F-150/250 LD Rear Bumper (4X2/4X4)

1997-98 F-150/250 LD REAR BUMPER (4X2 AND 4X4)

1. Turn off air suspension if applicable.

2. Hoist vehicle until bumper is at working level.

3. Clean excessive dirt from inside and outside the bumper.

4. Spray the back of the bumper from underneath the vehicle. Make sure to spray the license plate lights, openings, and the bumper pad retaining holes with Super Seal Anti-Corrosion Compound.

5. Lower vehicle and turn on air suspension if so equipped.

6. Clean off overspray as needed.